본문 바로가기

모바일

누크 대블릿에 CM10 Jelly Bean 또는 CM9 Ice Cream Sandwich 설치하기

반즈앤노블에서 리퍼로 판매하는 누크 태블릿을 저렴하게 구입해서 루팅하고 CM9을 설치해서 사용하는 방법을 소개합니다. 한참전에 누크 컬러를 재미나게 가지고 놀았던 기억이 나서 이번에도 시도해 봤습니다. 오랜만에 하는 것이라 약간 헷갈리긴 하네요!! 



CM10 (Jelly Bean) or CM9 (Ice Cream Sandwich) CWM 통해서 설치하기 


주의: 이 방법을 통해서 설치하면 워런티를 보이드 한다고 합니다. 


아래는 누크 태블릿에 설치가 완료된 CM9....

[출처: http://cdn.androidcommunity.com/wp-content/uploads/2012/04/nt-cm9-540x350.jpg]


이거 생각보다 쉬운것인데 많이 헤매다가 성공했습니다!! 일단 마이크로 SD 카드를 준비합니다. 윈도우즈에서 진행하는 것을 기준으로 설명합니다. 


아래 파일을 다운 받습니다. Zip으로 압축된 파일입니다. 압축풉니다!! 

http://www.mediafire.com/?dwwhzaixwwh2015


압축 풀면 대략 1.85기가 정도 되는 폴더가 만들어집니다!! 

폴더 안에서 윈도우즈 이미지 만들어주는 프로그램 Win32DiskImager 실행합니다. 

프로그램에서 같은 폴더에 있는 cwm_sd_flashing_boot.img 선택하고 "마이크로SD 카드 드라이브"를 선택해서 Write 하면 만들어 집니다. 


다 만들고 나면 70메가 정도되는 크기로 바뀌어 있습니다. 에고에고!! 

EaseUS 프로그램 (또는 MiniTool) Partition Manger로 크기를 변경하면 될 것 같기도 한데...이게 안되더군요!! 할 수 없이 꽁수를 썼습니다. 


누크 태블릿의 내부 공간에다가 CM 9 설치에 필요한 파일을 복사해 두었습니다!! 두가지 파일이 필요합니다! 


update-cm9-acclaim-alpha0.05.2-fullofbugs.zip

gapps-ics-20120429-signed.zip


CM 10 설치에 필요한 파일은 


http://goo.im/devs/chrmhoffmann/cm10/cm10-acclaim-0.05-full-of-bugs.zip

물론 구글 앱스 jelly bean 용도 필요합니다. 


드랍박스에 연결된 링크들입니다. 

https://www.dropbox.com/s/uop4mfwwud3jlww/cm10-acclaim-0.05-full-of-bugs.zip

https://www.dropbox.com/s/6qithsos2iuecoo/gapps-jb-20120726-signed.zip


두 파일을 모두 태블릿 내부 공간에 복사한 다음에, CWM이 설치된 마이크로 SD 카드를 누크태블릿에 넣은 후 태블릿을 켭니다. 어떤 사람은 n 하고 파워버튼을 동시에 눌러서 누크가 한번 켜졌다가 다시 깜빡하게 만들어야 한다고 했는데...그냥 되더군요!! 


XDA 포럼에 나온 설치 방법입니다. (INSTALLATION):

1. Prepare a “bootable” clockworkmod (CWM) recovery SD. There are instructions for doing this in other threads on XDA.

2. Download the recovery.img and the update.zip files at the end of this post to your computer from the link below.

3. Boot into a recovery SD for acclaim and use it to install the update.zip file. Warning: It should overwrite the contents of your emmc, including the stock installation or other operating systems.

4. From ClockworkMod. perform CWM wipe data and cache (or “restore factory settings”) to clear previous content from those partitions. Again, you will be erasing anything you had on those partitions.

5. Remove the SD card and select the reboot option. You should now boot into CM9.

6. To address a “wake from sleep” issue, go to Settings->Display->Sleep and increment timeout to 30 minutes. Otherwise you may experience a “Sleep of Death” type of thing, which will be addressed hopefully in the 3.x kernel.


To install CWM to emmc, download the recovery.img file below and do the following:

1. Download and install fastboot for your computer’s operating system.

2. Boot the device and hold the “n” key to get into the cyanoboot menu

3. From the menu, choose “Enable Fastboot”

4. On your computer, run: fastboot flash recovery recovery.img.


[출처: http://forum.xda-developers.com/showthread.php?t=1534192]


CWM으로 진입하게 되면...팩토리 리셋 하신후 위 두개 파일 찾아서 설치해 주면 끝납니다. CM7에 비해서 좋은 점은 소프트웨어 키가 항상 있습니다 -- 속도로 조금 빠르고 부드러운 것 같아요!! 해피합니다!! 


팩토리 리셋하기  (Perform Factory Reset of the Nook Tablet)

1. PWR off the Nook Tablet.

2. Hold "PWR" & "∩" buttons simultaneously to reboot.

3. After reboot, release the "PWR" & "∩" buttons after 2-3 seconds upon receiving the "∩ - Contains Reader® Mobile technology by Adobe Systems Incorporated." screen.

4. The screen may blink a couple seconds later and then you will be presented with the Factory Reset screen with the following options:


Do you want to reset your device to the factory default?

Press POWER key to exit

Press HOME key to continue

Are you sure?

This will delete all your content and restore the device to the factory default settings.

Press POWER key to exit

Press HOME key to continue


[출처: http://forum.xda-developers.com/showthread.php?t=1420408