본문 바로가기

모바일

누크 태블릿 언브릭 (unbrick) 방법

누크 태블릿 가지고 여려가지 롬 설치해보면서 잘 놀다가 CWM을 emmc에 설치해서 조금 더 편하게 가지고 놀려고 하다가...새로운 롬 설치가 잘 안되어서 이것저것 (아마 모든 시스템/부터/데이타/ 등의 영역을 포맷한 것이 문제가 아닐까 싶습니다만....


여하튼, 아담이라는 친구가 리눅스로 언브릭 (unbrick)하는 방법을 만들어서 따라해 봤습니다!! 지금 복원 중인데 잘 될 것 같습니다!! 


필요한 도구: 

누크 태블릿 

4기가 이상 마이크로 SD 카드 (클래스 4 보다 빨라야 된답니다) 

윈도우즈 컴퓨터 


아담이 만든 파일다운 받을 수 있는 곳입니다. 1.4 G 짜리 파일이라 오래 걸릴 수있습니다. 

https://www.sugarsync.com/pf/D7477784_65519709_66305


위에서 다운 받은 파일이 AdamOutlerUbuntuTotalReFlash.tar.gz 입니다. 7-zip 프로그램을 이용해서 두분 압축을 풉니다. 첫번째 압축을 풀면 AdamOutlerUbuntuTotalReFlash.tar 가 됩니다. 두번째 풀면 AdamOutlerUbuntuTotalReFlash 입니다. 끝에 확장자 .img 를 붙여 줍니다. 


이제 이미지를 win31diskimager 프로그램으로 마이크로 SD 카드에 설치하면 됩니다!!  SD 카드에 들어있는 모든 내용이 삭제되니 필요한 파일은 미리 복사해 두셔야 합니다!! 


윈디스크이미저 프로그램은 아래에서 다운 받습니다. 

win32diskimager-binary.zip


이미지를 설치한 다음에...꼭 누크 태블릿을 컴퓨터에 연결하신 후 누크가 파워오프 된 것을 확인 한 다음에 위에서 설치한 이미지가 들어있는 SD 카드를 누크에 넣고 전원을 켭니다. 


리눅스가 부팅이 되면서 100초 정도 깜빡 거립니다. 정상적으로 이루어 지고 있으니 걱정하지 마시길 바랍니다. 100쯤 초후 진행상황을 보여줍니다!! 


Theory of operation

how it works

When you insert the SDCard and turn on the device this is what happens.

The device boots from SDCard.

The Ubuntu GUI will load. Personally, I recommend that you do not touch anything

You will be presented with a 100 Second countdown

If you wish to stop, press and hold power for 10 seconds before flashing has started

You will be presented with a progress bar status update only. Closing this will not affect the process. the only way to stop is to turn the device off.

At this point, the flashing process will begin


Flashing Process

After Ubuntu has booted here is the procedure which takes place

MLO partition will be written with all zeros, then flashed

U-BOOT partition will be written with all zeros, then flashed

RECOVERY partition will be written with all zeros, then flashed

BOOT partition will be written with all zeros, then flashed

BOOTDATA partition will be written with all zeros, then flashed

BOOTDATA is mounted and a command is sent to factory reset the device upon next boot.

FACTORY partition will be written with all zeros, then flashed in two parts to work around a 120 second filesystem operation bug.

A sync operation takes place to ensure all data is written to the device

SYSTEM partition is wiped with all zeros

SYSTEM partition is recreated as a blank EXT4 filesystem

CACHE partition is wiped with all zeros

CACHE partition is recreated as a blank EXT4 filesystem

SDCARD partition is wiped with all zeros

SDCARD partition is recreated as a blank FAT32 filesystem

A sync operation takes place to ensure that all data is written

You are notified to press and hold power. When the screen goes black remove your SDCard


아담이 만든 이미지로 부팅해서 복원이 완료되면 아래와 같은 화면이 나옵니다!! 성공한 것입니다!! 

[출처: http://i43.tinypic.com/znq6ur.jpg]


지금까지 내용은 XDA developer 웹사이트 http://forum.xda-developers.com/showthread.php?t=1470910 를 참조하여 작성하였습니다. 새로 태어난 Nook Tablet 즐감하시길 바랍니다!!